Experimenting with IR - take two

[Grumpy John]

Many years ago I purchased a Hoya R70 infra red filter to use with my 7D. I lost interest in it because of the long exposure times needed to achieve a half decent exposure. The other day I decided to try it out using my R6 mirrorless and to my surprise I was able to achieve reasonable hand held images even though quite high ISO settings were required

#1 This is an enhanced noise reduction image with the profile set to Infra Red in ACR.
EXIF data.
Model: Canon EOS R6
Exposure Time: 1/80 sec
F Number: f/4
ISO Speed Ratings: ISO 25600
Exposure Program: Aperture priority
Metering Mode: Multi-segment
Exposure Bias: 0 EV
Flash: No flash
Focal Length: 24 mm
Lens Model: Rf24-240


#2 Processed with NIK Silver Efex and the blend mode set to Exclusion at %100 opacity.


#3 Same processing in ACR as previous image.

EXIF data.
Model: Canon EOS R6
Exposure Time: 1/80 sec
F Number: f/4.5
ISO Speed Ratings: ISO 6400
Exposure Program: Aperture priority
Metering Mode: Multi-segment
Exposure Bias: 0 EV
Flash: No flash
Focal Length: 30 mm
Lens Model: RF 24-240

#4 Processed with NIK Silver Efex and the blend mode set to Exclusion at %100 opacity.

[wigz]

Unusual and striking images John.

[Grumpy John]

Thanks for the kind words Alan.
As mentioned it the closed post I'm on a very slippery slope, but I'm pretty sure that I'll enjoy the ride.

[Isac]

All I can say is they are very different. Good to have a go and get different results. Do you have originals so we can see what you started with?

[Grumpy John]

All I can say is they are very different. Good to have a go and get different results. Do you have originals so we can see what you started with?

Both SOOC

[Isac]

I've never done IR in camera so it's good to see what comes out. Not only Infrared but great if you are INTO red
I can see you would have some fun playing with all sorts of filters.